The ezeScan 4 Potentiostat

Home    About    Projects   Products    News    Location    Contacts

Features

• Specifically designed for University and Analytical Laboratories where more complex potentiostats are usually not required (see specification).

• Easy to use PC based software for setup, graphical display and analysis.

• Simply connect to your PC via a USB cable.

• Simple to use potentiostat is availiable at a really affordable prices.  

Options

• 4 user selectable current ranges of 0–1, 0–10, 0-100 and 0-1000 microamps which can either be set manually or automatically controlled.

• The instruments can either be powered by batteries or by a mains adapter.

Techniques

• Cyclic Voltammetry, Linear Sweep Voltammetry, Chronoamperometry, Square Wave Voltammetry, Differential Pulse Voltammetry, ASV, CSV.

Specification

+/- 2.0V start and end potential  

1 mV/sec to 10V/sec scan rate

1 to 10 cycles (0 - 1000 seconds delay between cycles)

1,2,5,10 mV potential steps

1 - 1000 millisec sample intervals

+/- 2.0V start and end potential  

1 mV/sec to 10V/sec scan rate

1,2,5,10 mV potential steps

1 - 1000 millisec sample intervals

+/- 2.0 V applied potential

5,10,20,50,100,500,1000 millisecs reading intervals

1 to 1000 readings

+/- 2.0V applied potential

1,5,10,30,60,300,600 second reading intervals

1 to 5000 readings

+/- 2.0V start and end potential  

10 mV/sec to 10V/sec scan rate

1,2,5,10, 20 mV potential steps

10 - 500 Hz sampling  

5 - 200 mV amplitude

+/- 2.0V start and end potential  

10 mV/sec to 10V/sec scan rate

1,2,5,10, 20 mV potential steps

5 - 500 millisec pulse width

5 - 200 mV amplitude

+/- 2.0V conditioning potential  

1 second to 30 minutes conditioning/depostion  time

+/- 2.0V conditioning potential  

1 second to 30 minutes conditioning/depostion time

Back

Whistonbrook Technologies Limited Unit C24, 110 Butterfield, Great Marling, Luton, LU2 8DL  

Tel: 01582434252